How To Aim A Recurve Bow Without A Sight: 4 Methods

Recurve bow is becoming more and more popular with archers again. This is a traditional archery style that, a few years ago, seemed to lose more than the new modern style.

However, this type will be quite a challenge, especially for newbies, because it does not come with a sight. So, how to aim a recurve bow without a sight? Scrolling down to know more!

How To Aim A Recurve Bow Without A Sight? 

Instinctive Archery Method

You don’t “aim” at the target while shooting instinctively. Instead, you fix your attention on the spot where you want your arrow to land. Then you draw your bow, aim, and fire. An archer will accomplish all this while maintaining a laser-like focus on the chosen target.

The most conventional method of shooting a bow without sights is the instinctive archery method. Bows were initially utilized in this manner.

A baseball can be thrown, a golf ball hit, or a basketball can be shot, similar to how this form of shooting is done. You focus on the target while allowing your body and brain to adjust for the shot you want to make. When you use this technique more, your brain will make the adjustments required to hit your target better.

  • Start by assuming a comfortable, squared stance with your feet.
  • Point your arrow downward at the ground before you after knocking it.
  • Concentrate on your target, elevate the bow, and then release the string in one smooth action.

Gap Shooting Method

Gap shooting entails using the arrow’s tip as a point of aim. This is carried out along a hypothetical vertical one that passes through the middle of the object. A repeatable shot procedure is crucial for gap shooting. Repeatedly, every shot should be identical.

At 10 yards, for instance, you might point the arrow below the bullseye’s center. You could then need to adjust the arrow beyond the bullseye’s center at fifty yards. The arrow’s tip should aim directly towards the target’s point at a specific distance.

  • You should be aware of your distance from the target before you shoot.
  • Put your arrow point on the target’s center at a distance of five yards before starting.
  • The affection will very certainly be severe. Calculate the distance between the impact and the target’s centroid. This distance is far from you, about five yards.
  • Step back 10 yards, then shoot one more.
  • Check your gap once more while aiming for the point.
  • Your gap is now at a distance of 10 yards.
  • Say it measures 12 inches.
  • It’s essential to understand that to strike the target at 10 yards, you must adjust it about 12 inches from the bullseye.
how to aim a recurve bow without a sight
Gap shooting is easier for amateurs

String Walking

Your arrow’s point should always be pointed in the target’s center if you use string walking. The distinction is that your hand should go up and down depending on how far away the target is. 

The bowstring position will impact the arrow to guarantee that you strike your target even though your anchor point stays the same. This will alter the interaction between the arrow and your view by adjusting where you grip the bowstring. An arrow will fly higher or even lower as a result.

Your hand should be lower with the string the nearer you are to your intended target. Several players even estimate the grooves on the servings for each distance shooting. When compared to the gap shooting method, string walking is thought to be a more advantageous technique.

The disadvantage of this method is that you cannot extend it beyond a specific range. It is a remarkably precise method for doing without sights for the range at which it does work.

how to aim a recurve bow without a sight
String walking is suitable for a certain distance

Face Walking

Consistency with anchor points is one of this method’s main drawbacks. This method can be made more difficult by various facial shapes. Face walking can be precise, but it is not typically regarded as accurate as other techniques.

However, it does have the benefit of a constant aiming point. Your arrow’s tip will remain fixedly pointed at the bullseye’s center.

The following technique is known as face walking. Similar to string walking, but done the other way around. Your anchor will move in place of your hand, traveling up and vice versa.

You can alter the arrow impact based on the distance. The bow’s tone does not alter with distance is its major benefit. This is because the hand always rests on the bowstring in the same spot.

how to aim a recurve bow without a sight
Arrow’s tips are stabilized with the face walking method

Shooting With Sight Vs. Shooting Without Sight 

You must master the art of recurve bow shooting to make the most of either technique. Using a sight or not depends on your particular preferences. 

A steady, firm foundation guarantees you strike your target consistently regardless of your aiming technique. Using sight can take some practice, but it’s a fantastic method to increase your accuracy.

As you can see, no side has a certain winner, and both sides have advantages and disadvantages. It’s still ultimately a personal choice. 

It is more a matter of style than of practicality. It is now up to you to determine your preferred technique for Olympic or barebow competitions.

You should keep in mind, though, that sight alone cannot perform the function of shooting. Furthermore, helping your shot is more valuable than anything else when you are shooting blind.

Read More: Why Is Bow Hunting Illegal In Ireland? – A Quick Answer

Final Thoughts 

And that’s all for how to aim a recurve bow without a sight. It’s not an easy task, but you have up to four methods to choose which one suits you best.

Either way, practicing aiming without sight will help you level up. It‘s advisable to practice regularly. Then, it’s easier to get used to it and save time.

Leave a Comment