10 Best Outboard Motor Brackets for Pontoon Boats in 2026: Top Picks for Secure Kicker and Auxiliary Engine Mounting

Choosing the right bracket can make an auxiliary or kicker motor far more secure, easier to trim, and less stressful on your pontoon’s transom setup.

Below, we compare the best options for different engine sizes, mounting styles, and boating needs so you can narrow in on a bracket that fits your boat and use case.

Best 10 Outboard Motor Brackets for Pontoon Boats Picks for 2026

Trailer Support Pick – Mangrove Products Transom Saver Wedge for Single-Ram Outboards

If you want a simple way to protect your rig, this outboard motor bracket-style support for pontoon boats is designed as a wedge that fits single-ram hydraulic tilt systems. It helps brace the motor during trailering to reduce unwanted movement, with no drilling, straps, or metal parts to worry about.

Best For: Boat owners with compatible single-ram outboards who want a low-hassle trailering support.

Pros:

• Universal fitment for several major outboard brands and specific single-ram systems
• No drilling or special installation required
• EPDM rubber construction is made for saltwater and freshwater use
• Compression-rated design with secure inner notches

Cons:

• Only intended for single-ram tilt/trim setups
• Fitment is limited by engine model and horsepower range

For trailering support, this is a practical wedge solution that focuses on simplicity and corrosion resistance rather than a traditional metal bracket. The key is checking the fit guide carefully before buying.

Heavy-Duty Bracket Pick – Powrtran 9100 TOON Kicker Outboard Bracket

Among outboard motor brackets for pontoon boats, this Powrtran deck-mount bracket is aimed at owners who need a dedicated kicker-motor support. It uses a universal deck-mount design, includes all hardware, and is rated for outboards up to 25 HP.

Best For: Pontoon owners adding a small kicker motor with a straightforward deck-mounted bracket.

Pros:

• Universal deck-mount design fits all major manufacturers
• Rated for outboards up to 25 HP
• Includes all hardware for installation
• Satin black Cerakote finish

Cons:

• Limited to smaller outboards
• Large, heavy bracket at 37 pounds

This is a purpose-built option for a pontoon kicker setup, not a general-purpose motor support. If your goal is a stable mount for a small auxiliary outboard, it stays focused on the basics.

Electric Motor Mount Pick – Minn Kota MKA-33 Pontoon Motor Bracket

If you need a compact setup for an electric motor, this pontoon motor bracket is built to free up deck space while keeping removal simple. It works with Minn Kota quick release brackets and uses a hinge and door latch design for easier depth adjustment and take-off.

Best For: Pontoon boat owners using a hand-control electric motor who want a compact, removable bracket.

Pros:

• Compact footprint helps free up deck space
• Compatible with Quick Release Brackets
• Easy depth adjustment and removal
• Made from aluminum and stainless steel

Cons:

• Available with hand control motors only
• Not intended for gas outboards

This bracket makes the most sense for anglers who want a cleaner pontoon layout and an easy-to-manage electric motor mount. Its value is in convenience and space savings rather than heavy-duty outboard support.

Dual-Pack Support Pick – 2PCS Boat Transom Saver Wedge Set for 3-Ram Systems

This two-piece transom saver set is another option in the outboard motor brackets for pontoon boats category, but it is specifically made for 3-ram hydraulic trim and tilt systems. It uses a high-density rubber wedge with an aluminum alloy casing to help support the motor during trailering and reduce bouncing on rough roads.

Best For: Owners with compatible 3-ram hydraulic systems who want a rugged two-pack trailering support.

Pros:

• Designed for 3-ram trim/tilt systems
• High-density rubber wedge is trimmable for better fit
• Aluminum alloy casing adds rigidity and corrosion resistance
• No drilling required for installation

Cons:

• Not compatible with several listed engine families and newer models
• Fitment is narrow and system-specific

If your outboard matches the supported range, this set offers a durable, no-drill way to reinforce the motor while trailering. The main tradeoff is that it is highly specific, so checking compatibility is essential.

Heavy-Duty Auxiliary Pick – Panther 55-0410 10" Motor Bracket

If you need outboard motor brackets for pontoon boats that can also handle a serious auxiliary setup, the Panther 55-0410 is built for heavier four-stroke performance. It offers five vertical running positions, a 10-inch travel range, and a hand-adjustable knob that makes trim changes straightforward when water or load conditions change.

Best For: Pontoon owners who want a manual, heavy-duty auxiliary bracket for up to 35 HP four-stroke motors.

Pros:

• Built with anodized aluminum to support today’s heavier four-stroke motors
• Five vertical running positions with 10" of travel for adjustment flexibility
• Stainless steel torsion springs help counterbalance motor weight
• Extra-wide 2"-thick mounting board and stainless hardware for heavy-duty use

Cons:

• Manual operation may be less convenient than powered adjustment
• Requires the included Panther 55-0415 safety cable for proper use

Overall, this is a strong option when you want a robust auxiliary bracket and need hardware designed around weight, torque, and repeated adjustments. It suits buyers prioritizing durability and capacity over simplicity.

Budget-Friendly Support – Marinebaby 20 HP Aluminum Motor Bracket

For shoppers comparing outboard motor brackets for pontoon boats, this Marinebaby bracket is a straightforward aluminum support for smaller motors. It’s rated for 2-stroke motors from 7-1/2 HP to 20 HP and includes five-position locking height adjustment, so you can set the motor height to match different conditions.

Best For: Pontoon boat owners looking for a simple aluminum bracket for smaller 2-stroke auxiliary motors.

Pros:

• Supports 2-stroke motors from 7-1/2 HP to 20 HP
• Five-position locking height adjustment from 195mm to 320mm
• Stainless steel springs help counterbalance motor weight
• Aluminum construction with solid polypropylene mounting board

Cons:

• Mounting hardware is not included
• Requires 8mm screws for installation
• Designed for smaller motors than heavy-duty alternatives

This is a practical pick if you want a basic, corrosion-resistant bracket for a lighter auxiliary motor. Just be sure your motor size and mounting hardware match the product’s stated requirements.

Lightweight Electric Option – Black Thruster Auxiliary Motor Bracket

If your search for outboard motor brackets for pontoon boats is really about supporting a compact electric setup, this nylon-plastic bracket is aimed at brushless electric boat thrusters and similar small motors. It uses a transom mount design, supports pipe diameters of 1.1 inches, and is intended for fishing boats and kayak motor bracket applications.

Best For: Pontoon-style setups needing a lightweight bracket for a small electric thruster or auxiliary motor.

Pros:

• Designed for brushless electric boat thrusters and kayak motor brackets
• Lightweight nylon plastic construction
• Fits 1.1-inch pipe diameter applications
• Transom mount design for universal small-motor use

Cons:

• Maximum crossbeam thickness is limited to 3 inches
• Not intended for larger outboard motors
• Buyer should confirm dimensions before ordering

Compared with heavier aluminum brackets, this one is a niche solution for small electric systems rather than a traditional gas outboard. It makes sense when weight is a concern and the application matches the stated dimensions closely.

Heavy-Duty Pick – 2-Stroke Motor Support for 7.5-20 HP

If you’re comparing outboard motor brackets for pontoon boats, this heavy-duty aluminum option is built for small to medium setups that use 2-stroke auxiliary motors. It supports 7.5 HP to 20 HP and focuses on simple lifting, stable balance, and adjustable positioning for everyday marine use.

Best For: Boat owners needing a reinforced 2-stroke motor bracket with a 5-position height adjustment.

Pros:

• Reinforced welded aluminum frame for heavy-duty use
• Heavy-duty stainless steel springs help balance motor weight
• 5-position adjustable locking height for better positioning
• Includes necessary installation accessories

Cons:

• Not recommended for 4-stroke motors
• Designed for motors up to 20 HP only
• Mounting hole layout may require checking against your setup

Overall, this is a solid pick if your priority is a durable support bracket with adjustable lift and a straightforward aluminum build. It’s best suited to users who match the 2-stroke power range and want a dependable auxiliary motor stand.

Stable All-Rounder – Aluminum Outboard Support with 4-Position Adjustment

When shopping for outboard motor brackets for pontoon boats, this aluminum support is aimed at smaller auxiliary engines in the 7.5 HP to 20 HP range. Its retractable design, wide track body, and spring-loaded adjustment are meant to make lifting and balancing easier during sailing or docking.

Best For: Users wanting a stable, retractable bracket with a wide stance and simple height adjustment.

Pros:

• Aluminum frame with plastic base for a lighter build
• Spring-loaded 4-position locking height adjustment
• Wide track body adds stability
• Heavy spring helps balance motor weight

Cons:

• Limited to 7.5 HP to 20 HP motors
• Base is plastic, not all-metal
• Best suited to small to medium sized powerboats and yachts

This is a practical choice if you want a straightforward bracket with a stable footprint and easy adjustment. It balances useful features with a simple build that should work well for compatible auxiliary motors.

Compact Value Option – Heavy Duty Motor Bracket with White Plate

For buyers looking at outboard motor brackets for pontoon boats, this heavy-duty aluminum support covers the common 7.5 HP to 20 HP range and adds a corrosion-resistant build. It uses stainless steel springs and a solid polypropylene mounting board to help counter-balance the motor during use.

Best For: Owners who need a compact, corrosion-resistant bracket for a 2-stroke auxiliary motor.

Pros:

• Suitable for 2-stroke motors from 7.5 HP to 20 HP
• Stainless steel springs counter-balance motor weight
• 5-position locking height adjustment from 195mm to 320mm
• Corrosion-resistant build with solid polypropylene mounting board

Cons:

• Mounting hardware is not included
• Requires 8mm screws
• Only fits the stated 2-stroke horsepower range

This bracket makes sense if you want a durable, adjustable support and don’t mind supplying your own hardware. The corrosion-focused construction and compact footprint are good reasons to consider it for a compatible auxiliary motor setup.

How We Picked These Outboard Motor Brackets for Pontoon Boats

We focused on bracket strength, compatibility with common pontoon setups, supported horsepower ranges, and the practicality of installation and adjustment. We also looked for options suited to auxiliary, kicker, and electric-trolling applications, since pontoon owners often need different mounting solutions depending on how the boat is used.

Quick Comparison

Some brackets are designed as dedicated pontoon mounts, while others are better suited to auxiliary engines, kicker motors, or motor-support use during trailering and transport. Compact aluminum models are usually better for lighter engines, while heavier-duty brackets and specialty mounts are the safer choice when you need more rigidity or a more specific fit.

Key Buying Factors for Outboard Motor Brackets for Pontoon Boats

Engine Size and Weight

Check the listed horsepower and weight capacity first. A bracket that is technically compatible with your motor still needs enough margin to handle vibration, wake, and long-term stress.

Mounting Style

Some brackets are meant for permanent auxiliary engine mounting, while others act as support devices during transport or for hydraulic trim and tilt systems. Match the bracket type to your actual use.

Material and Corrosion Resistance

Marine-grade aluminum, stainless hardware, and protective finishes matter because pontoon accessories spend time in wet, salty, or high-humidity conditions.

Adjustment and Clearance

Look for enough offset and adjustability to clear rails, tubes, and ladders on your pontoon. Poor clearance can lead to interference when steering, tilting, or docking.

Ease of Installation

If you plan to install the bracket yourself, choose a model with straightforward mounting instructions and hardware that matches your boat’s layout.

Who Should Buy Which Outboard Motor Brackets for Pontoon Boats?

If you need a dedicated kicker setup, choose a bracket built for auxiliary engine use and verify the horsepower range carefully. If you’re mainly protecting a motor during transport, a support or transom saver style product may be the better fit. Anglers and boaters who want electric propulsion should focus on brackets made for trolling motors or electric thrusters. For heavier use or more demanding conditions, prioritize robust aluminum construction and a design specifically intended for pontoon mounting.

In short, the best Outboard Motor Brackets for Pontoon Boats balance fit, strength, and simplicity. Pick the style that matches your engine and how you actually use the boat, and you’ll end up with a safer, more reliable setup.