10 Best Navigation Lights For Jon Boats In 2026: Bright, Waterproof Picks For Safer Night Boating

Choosing the right navigation lights for jon boats is about more than checking a box for legality. You want bright, dependable lighting that’s easy to install, holds up to wet conditions, and gives you confidence when running after dark.

This roundup focuses on practical options for night fishing, early launches, and low-light boating, with attention to visibility, durability, and fit for smaller boats.

Best 10 Navigation Lights for Jon Boats Picks for 2026

Compact Port & Starboard Kit – Red/Green LED Bow Lights for Small Boats

If you want simple navigation lights for jon boats, this 2-piece red and green LED set is built for basic bow visibility on small craft. The surface-mount design, 12V compatibility, and included hardware make it a practical option for kayaks, jon boats, pontoons, and small fishing boats that need a straightforward port-and-starboard setup.

Best For: Jon boat owners who want an easy-to-install red and green bow light set for 12V marine use.

Pros:

• Includes both red port and green starboard lights for standard navigation use
• 6 LEDs per light for clear visibility in low-light and nighttime boating
• 2-wire hookup keeps installation simple on 12V systems
• Comes with screws, nuts, and foam pads for a more secure mount

Cons:

• Designed for surface mounting, so placement depends on your flat mounting area
• Best suited to small boats rather than larger marine setups

Overall, this is a no-frills navigation light kit that focuses on easy installation and dependable visibility. For smaller jon boats, it covers the basics without adding extra complexity.

USCG-Style Anchor Light – 12-Inch White Fold-Down Stern Light

For boaters comparing navigation lights for jon boats, this white fold-down stern light is a solid choice when you need rear anchor lighting with 360-degree coverage. It uses 51 SMD2835 LEDs, runs on 12-24V power, and is built with an IP67 waterproof rating for marine conditions.

Best For: Jon boats that need a bright white anchor or stern light with fold-down convenience.

Pros:

• 360° white light coverage for anchor-light use
• 51 LEDs and a claimed 3-nautical-mile visibility range
• IP67 waterproof rating for harsh marine environments
• Includes extension wire and mounting screws for installation

Cons:

• It is a stern/anchor light, not a red-and-green bow light set
• Only one light is included, so it does not cover both navigation positions

This model is best if your jon boat needs a bright white rear light rather than a full bow package. The fold-down design and marine-grade build make it practical for boats that need a durable anchor-light solution.

Flexible Brightness Upgrade – IP67 Red and Green Strip Bow Lights

If you want brighter navigation lights for jon boats without a bulky housing, this flexible red-and-green strip light set is made for simple bow mounting. It uses 18 LED chips, IP67 waterproof construction, and a double-sided adhesive back, so it is aimed at owners who want an easy visual upgrade for night boating and docking.

Best For: Jon boat owners looking for a slim, flexible red and green bow light upgrade.

Pros:

• Flexible strip body can fit corners and curved mounting areas
• Double-sided adhesive simplifies no-drill installation
• Claims strong brightness with 18 LED chips and up to 4-mile visibility
• IP67 waterproof design for marine use

Cons:

• Adhesive mounting may need extra sealant for long-term hold
• Less rigid than screw-mounted light housings

This option makes sense if you want a low-profile look and easy placement on a jon boat bow or rail. It is geared toward visibility, but the adhesive install means you may want to reinforce it for heavy use.

No-Drill Marine Strip Lights – Adhesive Bow Lights for Easy Mounting

For shoppers focused on navigation lights for jon boats, this adhesive strip set is built around fast installation and strong brightness. The flexible body, double-sided adhesive, and 18 LED chips make it a convenient choice for bow or rail placement when you want light output without drilling into the boat.

Best For: Jon boat owners who want a bright no-drill navigation light setup.

Pros:

• No-drilling installation with strong double-sided adhesive
• Flexible body can mount on rub rails and other tight spots
• 18 LED chips with claimed 5-mile visibility
• IP67 waterproof build with sealed ABS construction

Cons:

• Adhesive-only mounting may not suit every boat or surface
• Brightness claims are strong, but the setup still depends on proper placement

This is a good pick if you want an easy install and a bright, modern strip-light look. It suits jon boats where drilling is a concern, especially for users who want a straightforward marine lighting upgrade.

Top Pick for USCG Visibility – Obcursco Red and Green LED Boat Navigation Lights

If you want navigation lights for jon boats that feel built for serious night use, this Obcursco set is a strong fit. It uses red and green LED lighting with a 225° radiation angle, IP67 waterproofing, and a housing designed to resist corrosion, making it a practical choice for small boats that see regular water exposure.

Best For: Jon boat owners who want a compact bow-and-stern light set with USCG-focused visibility and weather resistance.

Pros:

• Meets USCG requirements for 2 nautical mile visibility
• IP67 waterproof design helps block water intrusion and short circuits
• Corrosion-resistant, triple chrome-plated zinc cover
• 225° wide visibility with red and green bi-color LEDs

Cons:

• Requires a 12V setup
• Hardwired installation may be less convenient than adhesive strip options

Overall, this is a straightforward, durable option if your priority is dependable marine compliance and long-term use rather than the easiest possible install. It suits jon boats, bass boats, skiffs, and other small craft that need a compact navigation light solution.

Easy Install Choice – Red and Green LED Marine Strip Navigation Lights

For buyers looking at navigation lights for jon boats and wanting the simplest install, this strip-style LED set stands out. It uses strong double-sided adhesive instead of drilling, and the manufacturer says the lights are much brighter than original nav lights, with visibility rated up to 5 miles.

Best For: Boat owners who want a no-drill navigation light setup that is quick to mount on rails or rub rails.

Pros:

• No-drilling install with double-sided adhesive backing
• Rated visibility up to 5 miles
• IP67 waterproof and resistant to rain, washing, and seawater splashing
• Flexible strip design with included screws and 32-inch wire leads

Cons:

• Strip format may not suit every bow or stern layout
• Brightness claims are compared to original nav lights, not a standardized test in the notes

This is a practical pick if you want an easier, less permanent install on a jon boat or kayak. The strip form and adhesive mounting make it appealing for owners who value convenience and strong visibility.

Compact Bow Light Pick – Obcursco 12-Inch LED Boat Navigation Lights

If you need navigation lights for jon boats in a compact bow-mounted format, this 12-inch Obcursco light is worth a look. It offers red and green LED output, 225° visibility, IP67 waterproofing, and a design meant for surface mounting on DC 12V boats.

Best For: Small-boat owners who want a compact, surface-mount bow light with dependable waterproofing.

Pros:

• 225° wide visibility helps improve nighttime visibility
• IP67 waterproof housing with corrosion-resistant materials
• Built for standard 12V systems with included mounting hardware
• Fits jon boats, kayaks, skiffs, pontoon boats, and other small craft

Cons:

• Designed as a front-mounted light, so it may not cover every full-boat lighting need alone
• Less convenient than adhesive strip lights if you want a no-drill install

This model makes sense if you prefer a compact, traditional-looking bow light with clear port and starboard signaling. It is a solid fit for owners who want something simple, weather-resistant, and sized for smaller vessels.

Strong Adhesive Bow Light Strip – No-Drill LED Navigation Light for Jon Boats

If you want navigation lights for jon boats that install fast and stay put, this LED red-and-green bow light is built around a strong adhesive strip and a flexible design. It’s aimed at simple mounting on rub rails without drilling, while still delivering the visibility and angle coverage needed for safer nighttime boating.

Best For: Jon boat owners who want a no-drill navigation light with easy mounting and USCG-oriented visibility.

Pros:

• Strong double-sided adhesive backing supports no-tool, no-drill installation
• 3 NM visibility with 225° illumination for navigation use
• IP67 waterproof ABS construction for marine environments
• Flexible strip design fits curved surfaces and rub rails

Cons:

• Adhesive install may not suit buyers who prefer a screw-mounted light
• Designed as a front bow light, so it’s only one part of a full lighting setup

This option makes sense if you value quick installation and a low-profile look. It combines practical bow visibility with marine-rated durability, making it a solid fit for small boats that see occasional night use.

Side Mount Screw-and-Adhesive Kit – Red/Green Bow Lights for Jon Boats

For shoppers comparing navigation lights for jon boats, this side-mount red and green set stands out for offering both screws and adhesive in the box. It’s designed for 12-24V systems, gives 3 nautical miles of visibility, and uses a sealed IP67 build to handle wet marine conditions.

Best For: Buyers who want a traditional side-mount navigation light with flexible mounting options.

Pros:

• Includes both 6 screws and adhesive for installation flexibility
• 3 NM visibility and 225° radiation angle meet USCG requirements
• IP67 sealed construction helps resist rain, fog, and storm exposure
• PC lens and ABS housing add durability for marine use

Cons:

• Requires a more traditional mount than adhesive-only options
• Black housing may be less discreet on some boat setups

This is a practical pick if you want a dependable bow-side light with a straightforward install kit. The mix of screw and adhesive mounting makes it easier to match your boat’s layout while still keeping the marine-grade protection buyers expect.

Bi-Color LED Bow Light Set – Compact Navigation Lights for Jon Boats

If you want compact navigation lights for jon boats, this bi-color LED set keeps things simple with red and green output in one front-mounted light. It runs on 12-24V systems, uses 28 LEDs, and is built to provide the 3 NM visibility and 225° illumination called out for safe night navigating.

Best For: Small-boat owners who want a compact bi-color navigation light with simple mounting choices.

Pros:

• Bi-color design combines red and green navigation lighting in one unit
• 28 LEDs and 2.3W power draw for efficient illumination
• 3 NM visibility with 225° coverage for navigation use
• IP67 waterproof, PC lens, and ABS housing for marine durability

Cons:

• Only includes two screws and adhesive, so hardware is lighter than some kits
• Front-position design may not suit boats needing separate side lights

This model fits buyers who want a streamlined light with marine-rated protection and flexible install options. Its compact bi-color setup is especially appealing for small boats where you want useful visibility without a bulky add-on.

How We Picked These Navigation Lights for Jon Boats

We looked for lights that make sense on smaller aluminum boats: strong red/green or bi-color visibility, simple mounting, waterproof or IP-rated construction, and 12V compatibility. We also favored options that suit common jon boat use cases like trolling at dusk, crossing busy water, and anchoring after dark.

Quick Comparison: What Matters Most

Most buyers will be choosing between bow-mounted red/green lights, stern anchor lights, and combined navigation setups. If you want the simplest all-around solution, a bi-color bow light can reduce clutter. If you need full navigation coverage, a separate bow plus stern setup is often more flexible.

Key Buying Factors for Navigation Lights for Jon Boats

Visibility and Beam Pattern

Look for lights that are bright enough to be seen from a practical distance and that throw light in the right direction. Red and green lights help identify heading, while a white stern or anchor light improves visibility when stopped or drifting.

Waterproofing and Corrosion Resistance

Jon boats live in wet, harsh environments, so IP67 or similar protection is a smart target. Rust-resistant housings and sealed wiring matter just as much as brightness, especially for boats stored outdoors or used in freshwater with frequent splashing.

Mounting Style and Installation

Some Navigation Lights for Jon Boats use adhesive or no-drill mounting, while others need side mounts or fixed hardware. If you want a fast upgrade, choose a simple install. If you want a more permanent setup, prioritize secure mounting and tidy wire routing.

Power and Compatibility

Most of these lights are built for 12V systems, so confirm your boat wiring and power source before buying. Also consider whether you want a self-contained light or a setup that integrates with existing switches and batteries.

Who Should Buy Which Navigation Lights for Jon Boats?

If you mainly fish at night and want a straightforward upgrade, a compact red/green LED bow light is usually the best starting point. If you often anchor or wait in low light, add a dedicated white stern or anchor light. For boaters who want the cleanest, least complicated setup, a bi-color navigation light can be the most convenient choice.

For larger small-boat setups, or if you want the most complete signaling arrangement, look for a kit that covers both bow and stern positions. The best choice depends on how you use the boat, how permanent you want the installation to be, and how much visibility you need on the water.