10 Best Boat Navigation Lights for Jon Boats in 2026: Bright, Waterproof Picks for Safer Night Runs

The right navigation lights make a jon boat easier to see and help you navigate safely after sunset. This roundup compares 10 LED options for bow, stern, and anchor-light applications.

We focused on waterproof construction, installation style, visibility, power requirements, and compatibility with small fishing boats, pontoons, kayaks, and other compact vessels.

Best 10 Boat Navigation Lights for Jon Boats Picks for 2026

Bright Flexible Upgrade – Flexible LED Bow Lights

For boat navigation lights for jon boats, this two-piece red-and-green LED strip-light set offers a flexible, highly visible option for upgrading nighttime operation. It runs on 12 volts, uses a strong adhesive backing, and is rated IP67 waterproof for marine use.

Best For: Jon boat owners who want bright, flexible lights with adhesive installation and added visibility around docks.

Pros:

• Flexible design can follow corners and curves on a Jon boat.
• Uses 18 imported 5050 LED chips and is advertised as up to three times brighter than factory navigation lights.
• IP67 waterproof silicone construction and 12V operation suit marine applications.
• Adhesive mounting avoids drilling; marine-grade silicone is recommended for a more permanent hold.

Cons:

• Adhesive installation may require marine-grade silicone for long-term security.
• The strip-light format may not suit buyers seeking a traditional rigid housing.

This is a practical choice when brightness and installation flexibility matter most. Its low-profile strip design can work well on a Jon boat, though careful surface preparation and supplemental adhesive may be worthwhile.

Corrosion-Resistant Choice – Obcursco LED Bow Light

These boat navigation lights for jon boats use a traditional red-and-green bow-light design with a die-cast, triple chrome-plated zinc cover. The 12V LED unit is rated for 2 nautical miles of visibility, includes IP67 waterproofing, and is designed for mounting on compatible small boats.

Best For: Jon boat owners who prefer a conventional, corrosion-resistant bow light with strong visibility and a durable housing.

Pros:

• Meets the supplied USCG visibility claim of 2 nautical miles.
• Die-cast, triple chrome-plated zinc housing passed a 72-hour salt-spray test.
• Innovative LED optics are designed to maintain brightness while reducing heat.
• Built-in gasket and IP67 construction help protect against water intrusion.

Cons:

• Only one light unit is listed in the package details.
• Its rigid housing requires a suitable mounting location rather than flexible placement.

With its conventional form factor and corrosion-focused housing, this Obcursco light is a solid fit for a Jon boat used in demanding marine conditions. Confirm the mounting arrangement and package contents before ordering.

No-Drill Night-Fishing Pick – Adhesive Bow Lights

For boat navigation lights for jon boats, this two-piece red-and-green strip-light set emphasizes easy, no-drill installation. Its flexible body and adhesive backing allow placement on a rub rail or above or below the rail, while the 12V LED design is rated IP67 waterproof.

Best For: Jon boat and small-boat owners who want low-profile adhesive lights for night fishing or quick installation.

Pros:

• No-drill adhesive mounting works on several rail locations.
• Six Germany-made 5050 LED chips are advertised to provide visibility up to 3 miles.
• Designed to be at least 2.5 times brighter than original navigation lights.
• IP67 protection resists rain, washing, and seawater splashing.

Cons:

• Adhesive mounting may be less secure than a screw-mounted housing in rough conditions.
• The supplied notes do not specify a power rating or included wiring hardware.

This set makes sense for buyers prioritizing a low-profile appearance and simple installation. It is especially suited to night-fishing setups, provided the mounting surface is clean and suitable for the adhesive.

Secure Mounting Option – RVZONE LED Bow Lights

These boat navigation lights for jon boats combine a traditional red-and-green bow-light layout with two mounting methods: screws or 3M adhesive. Their marine-grade composite nylon housing is designed for corrosion resistance, while the 12V, 1.2W LED system provides stated 2-nautical-mile visibility.

Best For: Jon boat owners who want the choice of a more secure screw mount or a simpler adhesive installation.

Pros:

• Includes screws and supports 3M adhesive mounting.
• Marine-grade composite nylon housing is lightweight and corrosion resistant.
• Each lamp uses 21 LEDs, with a stated 2-nautical-mile visibility rating.
• IP67 sealing uses a gasket and glue to help protect against rain, seawater, and fog.

Cons:

• Screw installation requires drilling and suitable mounting access.
• The listed 112.5-degree radiation angle applies to each light, so placement must be correct.

This is a versatile choice for a Jon boat because it accommodates both permanent and adhesive installation. Its low 1.2W power rating also makes it an appealing option when power conservation matters.

Best Adhesive Install – Flexible LED Bow Lights

For boat navigation lights for jon boats when you want to avoid drilling, this Boaton set uses flexible adhesive-backed LED strips that can mount along a rub rail or above or below the rail. The red-and-green pair runs on 12 volts and is rated IP67 waterproof.

Best For: Jon boat owners who want bright bow lighting with a no-drilling installation.

Pros:

• Adhesive-backed, flexible design simplifies installation.
• Uses 18 German 5050 LED chips and is advertised as visible up to 5 miles.
• IP67 waterproof construction with sealed silicone and ABS housing.
• 32-inch leads and 22 AWG wire help simplify connection.

Cons:

• Adhesive mounting may be less suitable for surfaces that are dirty, wet, or uneven.
• The supplied information does not specify a USCG certification claim.

This is a practical choice for small boats and night fishing setups where easy placement and strong illumination matter more than a traditional screw-mounted housing.

Best Traditional Mount – Obcursco LED Bow Light

These boat navigation lights for jon boats are a conventional red-and-green bow-light option for 12V to 24V systems. The vertical-mount design includes rubber gaskets, provides 112.5-degree visibility, and is advertised as visible from 2 nautical miles.

Best For: Jon boat owners seeking a compact, screw-and-wire-mounted navigation light with a traditional appearance.

Pros:

• Red-and-green LED configuration is designed for bow navigation use.
• Advertised 2-nautical-mile visibility and USCG requirement compliance.
• IP66 waterproof sealed LED units resist water intrusion.
• Includes rubber mounting gaskets for installation.

Cons:

• Installation requires wiring and a mounted location rather than adhesive placement.
• Visibility is specified at 112.5 degrees, so it is not an all-around light.

With its compact ABS housing, gasketed mounting, and broad compatibility with small boats, this set suits buyers who prefer a standard bow-light installation over flexible strip lighting.

Best Stern Visibility – 12-Inch LED Anchor Light

For boat navigation lights for jon boats that need rear or anchor coverage, this 12-inch white LED stern light provides 360-degree visibility and is designed for 12V to 24V systems. Its IP67 rating, stainless steel pole, and fold-down design suit regular marine use.

Best For: Jon boat owners needing a bright, elevated stern or anchor light for night fishing and low-light operation.

Pros:

• 360-degree all-around visibility with advertised 3-nautical-mile illumination.
• IP67 waterproof construction and a 304 stainless steel pole.
• Four-screw base provides stable mounting.
• 180-degree fold-down design protects the light when not in use.

Cons:

• This is a single white stern or anchor light, not a complete red-and-green bow-light set.
• Requires drilling and fastening with four screws.
• Its 12-inch height may be more than some compact setups need.

This light is a strong complement to bow navigation lights when your jon boat needs an elevated, all-around white light at the stern or anchor position.

Best Budget Bow-Light Set – Shangyuan Red and Green LED Bow Lights

For boat navigation lights for jon boats, this Shangyuan set offers a straightforward red-and-green bow-light arrangement for 12V vessels. Each light uses six LEDs, and the surface-mount design includes screws, nuts, and foam pads for installation on suitable flat surfaces.

Best For: Jon boat owners who need a basic port-and-starboard lighting set for nighttime boating, fishing, or docking.

Pros:

• Includes one red port light and one green starboard light.
• Six LEDs per light provide clear red and green illumination.
• Two-wire installation is simple for 12V DC systems.
• Screw mounting and foam pads can provide a more secure fit than adhesive-only mounting.

Cons:

• Designed for 12V systems rather than a broad 12–24V range.
• Surface mounting is intended for relatively flat boat surfaces.

This is a practical, no-frills option when you want separate red and green bow lights with included mounting hardware. Verify your boat’s wiring and mounting area before installation.

Best Stern Light for Visibility – AMBIPASION 12-Inch LED Anchor Light

If your boat navigation lights for jon boats need a rear or all-around light, this 12-inch AMBIPASION anchor light is built for stern and anchor-light use. It provides white 360-degree illumination, supports 12–24V systems, and has a fold-down design for storage or clearance.

Best For: Jon boat and small-boat owners looking for a bright white stern or anchor light with broad coverage and a foldable mount.

Pros:

• Uses 51 SMD2835 LEDs for bright white illumination.
• Provides 360-degree coverage and a stated visibility range of 3 nautical miles.
• IP67-rated construction is designed for demanding marine conditions.
• 180-degree fold-down design and included mounting screws support convenient installation.

Cons:

• This is a white stern or anchor light, not a red-and-green bow-light pair.
• At 12 inches, it may be more substantial than needed for very small craft.

Choose this model when rear visibility and all-around white coverage are your priorities. Its 12–24V compatibility also gives it more electrical-system flexibility than a 12V-only light.

Best No-Drill Bow Lights – Flexible Red and Green LED Strips

These flexible strip lights are a useful alternative for boat navigation lights for jon boats when drilling is undesirable. The red and green LED strips use strong double-sided adhesive, fit curved rub rails, and are rated IP67 for marine exposure.

Best For: Jon boat owners who want flexible red-and-green bow lighting with adhesive installation and enhanced visibility around docks.

Pros:

• Adhesive backing allows no-drill installation on suitable rub rails and curved surfaces.
• Red and green strips provide a 225-degree navigation-lighting angle.
• 5050 LEDs are designed for bright, energy-efficient illumination.
• IP67 waterproof construction and 22 AWG wires support marine installation.

Cons:

• Adhesive mounting may require careful surface preparation for a durable bond.
• As strip lights, they may not suit owners who prefer conventional rigid navigation-light housings.

This set stands out for flexible placement and avoiding holes in the boat. It is especially appealing for curved bow areas, night fishing, and docking visibility, provided the mounting surface is clean and compatible with the adhesive.

How We Picked the Best Boat Navigation Lights for Jon Boats

We selected these lights based on the features that matter most on a small, open boat: clear red-and-green bow visibility, dependable white stern or anchor lighting, water resistance, mounting flexibility, and practical power requirements. The list includes adhesive no-drill designs, vertical and deck-mount options, and 12V lights intended for more permanent installations.

Because product listings can vary by seller and revision, confirm the included hardware, wiring, switch arrangement, and stated certification before buying. A light described as waterproof should still be installed with protected connections and positioned where it will not be submerged unnecessarily.

Quick Comparison

Best For	Look For	Common Option
Simple installation	Adhesive, no-drill mounting	Bow lights for jon boats, kayaks, and canoes
Permanent setups	12V wiring and included brackets	Red-and-green LED bow lights
Rear visibility	White stern or anchor light	12-inch fold-down or pole-style lights
Wet conditions	IP67-rated housing and sealed connections	Waterproof LED navigation lights

Key Buying Factors for Boat Navigation Lights for Jon Boats

Bow, Stern, or All-Around Coverage

Red and green lights generally identify the port and starboard sides at the bow, while a white stern or all-around light improves visibility from behind and may be required for your operating situation. Check your local boating rules to determine the correct arrangement.

Mounting and Wiring

No-drill adhesive lights are convenient for temporary setups, rental boats, and thin aluminum surfaces, but they depend on clean, dry mounting areas. Screw-mounted or bracketed lights are usually better for long-term use. Verify whether batteries, wiring, switches, and mounting hardware are included.

Water Resistance and Durability

IP67-rated products are designed to resist dust and temporary water immersion under stated test conditions. Even so, protect terminals from corrosion, route wires away from abrasion, and avoid relying on a light’s rating if the housing is cracked or poorly sealed.

Brightness, Visibility, and Power

Choose a beam that can be seen clearly without creating distracting glare. LED lights use relatively little power, but battery-operated and 12V models suit different boats. Match the light to your battery system and estimate runtime if you fish or travel at night for extended periods.

Who Should Buy Which Boat Navigation Lights for Jon Boats?

Choose an adhesive bow-light set if you want the fastest installation with minimal modifications. Select a permanent 12V red-and-green pair if your jon boat is used regularly and you want a more secure wired setup. Add a white stern or anchor light when rear visibility or an all-around light is needed. For frequent night fishing, prioritize sealed LED housings, reliable mounting, and easy-to-replace wiring over decorative features.