10 Best Minn Kota Trolling Motor Replacement Propellers for Reliable Performance in 2026

If your trolling motor has lost thrust, picked up damage, or just needs a fresh prop, choosing the right replacement can make a big difference on the water.

This roundup of Minn Kota trolling motor replacement propellers focuses on fit, compatibility, and practical performance so you can replace the prop with confidence.

Best 10 Minn Kota Trolling Motor Replacement Propellers Picks for 2026

Compact Weedless Replacement – Minn Kota Weedless Wedge 2 Prop for 35 lb Motors

If you need Minn Kota trolling motor replacement propellers for a smaller setup, this Weedless Wedge 2 prop is built to keep you moving in heavy cover. It fits 3-1/4 inch motor diameters on motors up to 35 lb thrust and is designed to push weeds away while helping conserve battery power.

Best For: Anglers using compact Minn Kota motors in weedy water who want a simple replacement with hardware included.

Pros:

• Weedless design helps reduce fouling in heavy vegetation.
• Fits 3-1/4 inch motor diameters on motors up to 35 lb thrust.
• Impact-resistant composite construction for better durability.
• Includes prop nut, pin, and washer for installation.

Cons:

• Limited to the smaller 3-1/4 inch motor fit.
• Not intended for higher-thrust or larger-diameter Minn Kota motors.

For compact trolling motors that spend time in weeds or cover, this is a straightforward replacement prop with the right hardware in the box. It prioritizes reliable push and practical efficiency over specialty features.

Wide-Fit Replacement Kit – MKP-33 Weedless Wedge 2 Prop Replacement Kit

Among Minn Kota trolling motor replacement propellers, this MKP-33-compatible kit stands out for broad fitment across many 4-inch lower-unit motors. It is made as a direct replacement for Minn Kota part 1865018 and includes the hardware and socket wrench needed for a complete swap.

Best For: Owners of compatible 4-inch Minn Kota motors who want a full replacement kit with installation hardware.

Pros:

• Direct replacement for Minn Kota MKP-33, part 1865018.
• Fits 4-inch motor diameters across many Minn Kota models.
• Includes prop, drive pin, nut, washer, and socket wrench.
• Designed to help minimize weeds and debris entangling the prop.

Cons:

• Fitment is specific to listed 4-inch diameter motors and serial ranges.
• More complex compatibility check than a universal-style prop.

This is a practical pick if you need a replacement kit rather than just the prop itself. The bundled tools and parts make it easier to complete the install and get back on the water.

Saltwater Compact Option – Minn Kota Weedless Wedge 2 Prop for Salt Water

If you want Minn Kota trolling motor replacement propellers for compact motors in saltwater use, this Weedless Wedge 2 prop is built for that job. It fits 3-1/4 inch motor diameters on motors up to 35 lb thrust and is designed to deliver extra power while keeping battery draw efficient.

Best For: Saltwater anglers with smaller Minn Kota motors who want a durable weedless replacement prop.

Pros:

• Designed for saltwater use.
• Weedless shape helps push through heavy vegetation, wind, and current.
• Fits 3-1/4 inch motors up to 35 lb thrust.
• Includes prop pin, nut, and washer.

Cons:

• Limited to compact 3-1/4 inch motor diameters.
• Not the right choice for larger Minn Kota motor platforms.

This prop makes sense if you need a dependable replacement for a smaller trolling motor and fish in tougher conditions. It combines straightforward installation with a design aimed at efficiency and control.

Broad Compatibility Upgrade – MKP-32 Weedless Wedge 2 Prop for Minn Kota

This MKP-32 replacement is aimed at anglers shopping for Minn Kota trolling motor replacement propellers with wider compatibility across many 3-5/8 inch lower units. It is designed for 2005-present Minn Kota motors with the listed serial prefixes and comes with the drive pin, nut, and washer needed for installation.

Best For: Owners of compatible 3-5/8 inch Minn Kota motors who want a weedless prop built for heavy vegetation.

Pros:

• Fits 3-5/8 inch lower units on supported Minn Kota motors.
• Compatible with many Endura, PowerDrive, Riptide, Terrova, and other models.
• Weedless blade shape helps wedge weeds away and conserve battery power.
• Includes drive pin, nut, and washer.

Cons:

• Compatibility depends on specific motor diameter and serial prefix.
• Not intended for motors outside the listed MKP-32 fitment range.

For the right Minn Kota model, this is a solid replacement prop with the hardware included. Its weedless design and broad model support make it a practical upgrade for shallow, vegetation-heavy water.

OEM-Style Weedless Wedge 2 – Minn Kota Weedless Wedge 2 Prop for Trolling Motors

If you need a straightforward Minn Kota trolling motor replacement propeller for a 4-1/2" lower unit, this Weedless Wedge 2 prop is built to match the basics of the original setup. It uses a 1" x 3/16" drive pin and a 3/8"-24 prop nut thread, making it a practical choice when you want the correct fit without extra parts or guesswork.

Best For: Replacing a compatible Minn Kota prop on a 4-1/2" lower unit with the standard Weedless Wedge 2 fitment.

Pros:

• Fits 4-1/2" lower unit diameter
• Uses 1" x 3/16" prop/drive pin
• Prop nut thread is 3/8"-24

Cons:

• Fitment is specific to compatible Minn Kota setups
• No extra installation hardware is listed beyond the prop specification

This is a simple replacement option when matching the listed shaft and nut dimensions matters most. If your motor calls for this Weedless Wedge 2 format, it keeps the buying decision focused on compatibility.

Compatible MKP-38 Kit – MKP-38 Prop Replacement for Minn kota Trolling Motor Propller

This MKP-38 prop replacement is a Minn Kota trolling motor replacement propeller designed for 4-1/2" lower unit diameter setups, with compatibility called out for a wide range of models. It includes the prop, a 1" x 3/16" drive pin, and a prop nut with 3/8"-24 thread, so it covers the core parts needed for a like-for-like swap.

Best For: Anglers who want a Weedless Wedge 2-style MKP-38 replacement for supported Minn Kota models and a complete prop kit.

Pros:

• Compatible with multiple listed Minn Kota models, including Fortrex, Terrova, Ulterra, and Riptide variants
• Includes prop, drive pin, and prop nut
• Designed with swept-back and flared blades to wedge weeds away
• Made from high-quality plastic for marine use

Cons:

• Compatibility depends on specific model and serial-number prefix guidance
• Only the listed sizes and part references are suitable here

For buyers matching the exact MKP-38 fit, this kit is appealing because it bundles the key install pieces and is shaped for weedless performance. The main check is still model compatibility before ordering.

Wide-Compatibility MKP-33 – MKP-33 Trolling Motor Propeller Compatible with Minn Kota 4" Motor Diameters

For shoppers looking for Minn Kota trolling motor replacement propellers on 4" motor diameters, this MKP-33 option is positioned as a broad-compatibility weedless wedge 2 replacement. It lists support for many 80lb and 101lb motors and includes the prop, a socket wrench, and the matching hardware dimensions needed for installation.

Best For: Replacing an MKP-33-style prop on supported 4" Minn Kota motor diameters with included install hardware.

Pros:

• Fits 4" motor diameters
• Compatible with many listed Minn Kota models and thrust ratings
• Includes a socket wrench for the prop nut
• Curved winglets and swept-back blades are designed for easier weeding

Cons:

• Compatibility is limited to the listed models and part numbers
• Installation still requires careful tightening to avoid damaging the prop

This is a practical replacement kit if your motor matches the stated MKP-33 dimensions and part numbers. The included wrench and hardware details make it easier to verify you have what you need before starting the swap.

Budget Pick – MKP-32 Weedless Wedge 2 Prop for Minn Kota

If you need Minn Kota trolling motor replacement propellers for a 3-5/8″ lower unit, this MKP-32 Weedless Wedge 2-style option is built as a direct replacement for a wide range of 2005-present motors. It is shaped to push weeds away, keep drag down, and help maintain smooth operation when fishing shallow or weedy water.

Best For: Anglers who want a direct-fit replacement prop with weed-shedding performance for compatible Minn Kota motors.

Pros:

• Direct replacement for Minn Kota parts #2091160 and #1865017
• Swept-back, flared blades help reduce weed buildup and drag
• Includes drive pin, nut, and washer for installation
• Corrosion-resistant plastic construction for everyday use

Cons:

• Fitment is limited to 3-5/8″ lower unit Minn Kota motors
• Plastic construction may not appeal to buyers seeking metal components

This is a practical replacement if you want a straightforward MKP-32-compatible prop and value simple installation. It focuses on matching OEM-style fit and weedless performance rather than adding extra frills.

Most Complete Kit – MKP-32 Weedless Wedge 2 Prop Replacement Kit

For shoppers comparing Minn Kota trolling motor replacement propellers, this MKP-32 option stands out by pairing broad compatibility with a more complete install kit. It replaces the Weedless Wedge 2 prop on many 3-5/8″ Minn Kota motors and is shaped to move through weeds with less drag and better battery efficiency.

Best For: Boaters who want a full replacement kit with stronger nylon construction and broad Minn Kota fitment.

Pros:

• Fits many 3-5/8″ Minn Kota motors from 2005-present
• Replaces OEM part numbers 2091160, 1865017, and 1378131
• Marine-grade nylon is described as tougher than standard plastic
• Includes prop nut, washer, prop wrench, and 4 shear pins

Cons:

• Compatibility is still limited to specific Minn Kota motor sizes
• Shear pin selection may require choosing the right size option

If you want a replacement that feels more complete out of the box, this kit is an easy pick. It emphasizes durability, weedless performance, and quick installation for anglers who want to get back on the water fast.

Top OEM Match – MKP-32 Weedless Wedge 2 Prop Replacement

This MKP-32 replacement is aimed at buyers who want a direct OEM-style match among Minn Kota trolling motor replacement propellers. It fits many 3-5/8″ motors from 2005 onward and uses the familiar weedless blade profile intended to slice through thick vegetation while keeping operation smooth and quiet.

Best For: Anglers who want an exact-performance replacement for a worn or missing Minn Kota Weedless Wedge 2 prop.

Pros:

• Direct replacement for MKP-32, 2091160, 1865017, and 1378131
• Fits a long list of Minn Kota motors including Edge, Endura, PowerDrive, and Riptide
• Marine-grade nylon construction resists corrosion and UV exposure
• Includes prop nut, washer, multiple shear pins, and a prop wrench

Cons:

• Only works with compatible 3-5/8″ lower unit motors
• Plastic-and-metal build may not suit those seeking premium materials

For shoppers who want a replacement that closely mirrors the original Weedless Wedge 2 setup, this is the most straightforward option here. The kit approach and broad fitment make it a solid pick for restoring thrust and quiet operation.

How We Picked the Best Minn Kota Trolling Motor Replacement Propellers

We focused on Minn Kota Trolling Motor Replacement Propellers that match common shaft and motor diameters, use the correct weedless wedge design, and offer straightforward installation. Compatibility matters most here: the best prop is the one that fits your exact motor model and diameter without guesswork.

We also favored options that are widely used as direct replacements, since a properly matched prop helps restore thrust, reduce vibration, and keep your trolling motor operating efficiently.

Quick Comparison

Most options in this roundup fall into a few fit categories. MKP-32 models are commonly selected for 3-5/8-inch motor diameters, MKP-33 options are aimed at 4-inch motor diameters, and MKP-38 replacements are designed for 4-1/2-inch motor diameters. That makes the diameter check the fastest way to narrow your choices.

If you already know your motor family, compare the prop number first, then confirm the diameter and compatible model list. If you are unsure, check the motor housing or owner’s manual before ordering.

Key Buying Factors for Minn Kota Trolling Motor Replacement Propellers

Fit and Diameter

The correct diameter is non-negotiable. Minn Kota Trolling Motor Replacement Propellers are built for specific motor sizes, and even small mismatches can cause poor performance or installation issues. Match the prop number and diameter to your motor exactly.

Model Compatibility

Some props fit multiple Minn Kota lines such as Endura, Edge, PowerDrive, Riptide, and Terrain. That said, compatibility can vary by generation, so verify the exact replacement part number rather than relying on the motor name alone.

Performance in Weeds

The Weedless Wedge 2 design is popular because it helps push through vegetation more effectively than a standard prop. If you fish weedy lakes or shallow water, that shape is worth prioritizing.

Durability and Maintenance

Look for a prop that can handle regular impacts with weeds, light debris, and repeated use. Even a replacement prop should be easy to inspect and swap, since carrying a spare can save a trip if damage occurs.

Who Should Buy Which Minn Kota Trolling Motor Replacement Propellers?

Choose an MKP-32 replacement if your motor calls for a 3-5/8-inch prop. Go with an MKP-33 if your motor uses a 4-inch diameter prop, and select an MKP-38 if your setup requires the 4-1/2-inch option.

Anglers who fish heavy cover should lean toward the Weedless Wedge 2 style, while casual freshwater users may care most about a simple, exact-fit replacement. If you want the safest purchase, match the part number first, then confirm the diameter and compatible motor list before checkout.