“Do you have to unstring a recurve bow?” is a popular question if you are a beginner who wants to improve your archery skills. The recurve bow gives you flexibility and more power than the traditional one with a curved back.
If you have such a bow, do you need to relax the string to keep its original shape? Read on for more details!
Contents
What Is A Recurve Bow?
The only difference between a normal bow and a recurve one is their shape regarding appearance. In particular, the limbs of a recurve one will bend away from you when unstrung.
This bow type is shorter than a traditional straight bow, with greater energy for a given arrow. You can use this recurve bow in riding horses, woodlands, or bushes that can make your long arms awkward.
Do You Have To Unstring A Recurve Bow?
Yes, you do. You need to unstring your recurve bow to release the force and pressure after you arch. Besides, relaxing recurve bows are also necessary to replace with the new string to prevent your string body from damage and injury when you take bowhunting and archery.
Why should you unstring your recurve bow? Unstringing the bow is useful to avoid damage or poor performance. This also gives the flexion on the limbs, providing energy to propel the arrow forward.
What can happen if you don’t unstring your bow? Leaving your bow at full tension with a string can increase the burden or pressure on your hands and feet, which might cause unwanted damage or injury.
When Should you Unstring a Recurve Bow?
You should unstring a recurve bow after use. However, it also depends on the type of recurve bow and the time of use. It is critical to take your string off with recurve bow stringer properly.
If you have been shooting the same recurve bow for more than ten years, you should unstring it after 2-3 weeks after arching.
How Long Should You Leave A Recurve Bow Strung?
You can leave your bow strung all day.
What Should You Do To Safely Unstring Your Recurve Bow?
You should know how to properly and safely unstring or string a recurve bow to avoid damaging your string and bow.
Let’s also follow the correct technique for drawing and arching a recurve bow.
How Can You Unstring Your Recurve Bow?
Get A Bow Stringer
The first step is to manage the recurve bow tensioner by getting a new bow stringer. The string can be adjustable about 2 meters long. The stringer has a leather pouch and a leather saddle on each end.
You can choose two common bow stringers on the market: saddle loop and dual loop bow stringers. Pick whichever suits your taste.
Attach the Large Pocket Over the Lower Limb
Once you have the good bow string, start attaching the large pouch to the bottom end of the bow. Ensure the oversized pocket fits the bow’s end to avoid making it too tight or loose.
Place The Other Pocket Or Saddle On The Upper Limb
Similarly, take the other pocket and put it on the bow’s top leg. If you have a saddle, place the loop rests on your torso. Once you attach both ends, look under the bow’s nocks and put the pad on its curve. Remember to keep your saddle stable.
Hold The Bow Horizontally
Hold your bow near the top of your upper leg with your dominant hand and grasp the center handle with your other hand. Place it parallel to the side of the string closest to the ground.
Stand On The Bow Cord With Both Feet
Lower your recurve bow until the bowstring touches the floor. Use both feet shoulder-width apart to stand on the bow string, and remember to keep your feet stable.
Lift The Bow To Loosen The String
Grab the bow and pull it up until it stands up again. This step will loosen the bowstring as the bow stringer must work to relieve excessive tension and heavy pressure on the bowstring.
Remove The Bow String
If the bowstring is loose, you should use your strong hands to loosen it. You need to concentrate on the notch that gives security to the bowstring’s body. You can easily and quickly pull the bowstring out of the groove by following the above steps.
Loosen the bowstring using the same procedure on both its ends. You are almost finished if you performed lifting your bow successfully for loosening your string.
Bring the bow back to the ground to release the pressure and tension on the string. Now, you’ve completed the full process of relaxing the bowstring and taking it off.
Read More: How Much Does An Olympic Archery Bow Cost: Reach The Thoughtful Answer
Conclusion
So, do you have to unstring a recurve bow? Yes, you do. This can keep your recurve bow in perfect shape and avoid facing injury to yourself.
It is essential to give your bow safety and power. So, please follow the complete guide in the above article to release the tension and burden on your bow and string body.